Installation Guide
11 10
INSTALLATION INSTRUCTIONS
9. GLASS DOOR ADJUSTMENT
Note: some models do not have these hinge
styles and therefore this step can be skipped.
The glass doors are attached to your unit with
4 hinges (2 hinges on each door). Each hinge
is attached to the frame of the unit with
2 adjustable screws.
If the glass doors are not aligned properly, they
can be easily adjusted:
• Loosen the 2 screws on one of the hinges.
DO NOT remove the screws – just loosen them.
• Adjust the position of the door.
• Once the door is positioned properly, re-tighten
the screws.
• If necessary, loosen the other hinge, adjust the
door, and re-tighten.
9
CARE AND MAINTENANCE
WARNING: DO NOT allow any cold liquid or substance to come in contact with the glass doors
while they are hot. This could cause the glass to shatter.
GLASS:
• Allow glass to cool fully before cleaning.
• Clean the glass with a diluted solution of ammonia and a clean cloth.
• DO NOT use scouring pads or harsh chemicals as it may damage the tempered glass.
FRAME:
• Clean the surface of the unit with a damp cloth.
•Ifnecessary,useadilutedsolutionofalcoholtoremovengerprintsorothermarkings.
• DO NOT clean with scouring pads, harsh chemicals, cleaners, or solvents.
WARNING
DO NOT close the glass doors
until the fireplace has completely cooled.