Manualshelf

User's Guide

ManualsBrandsUnified Information Devices ManualsElectronicsNear Field RF ID Tag Reader/Writer
51525354555657585960
April 4, 2019
USER GUIDE: UBS-200L LF DESKTOP READER
49
Appendix 3 – Connecting to Third-Party Systems | Unified Information Devices 001.006.03
v1.3
1. Testing Communications using Terminal Software.
2. Send the following commands to configure the UBS-200L for “Continuous Read Mode.”
CID 1
TOR 0
CN 1
MD 0
VSAVE
The terminal session should appear as below:
3. Set-up is complete! The UBS-200L is now in Continuous Read mode!
Configuring Instem Provantis for Continuous Read Mode
1. From the “Start” menu on the PC, navigate to and select the “Instrument Comms Interface”:
Start -> Programs -> Provantis -> Administration -> Instrument Comms Interface