User's Guide

April 4, 2019
USER GUIDE: UBS-200L LF DESKTOP READER
47
Appendix 3 – Connecting to Third-Party Systems | Unified Information Devices 001.006.03
v1.3
Appendix 3 – Connecting to Third-Party Systems
Configuring Instem Provantis COM Port Settings
1. From the “Start” menu on the PC, navigate to and select the “Instrument Comms Interface”:
Start -> Programs -> Provantis -> Administration -> Instrument Comms Interface
2. The “Generic Interface Setup” Screen appears.
3. Populate the fields according to the values the table below.
Interface ID:
(Use Something recognizable, such as UI Devices UBS-200L)
Communication Parameters
Serial Port:
COMX (Where X is the COM port value determined in Chapter 2 –
Getting Started with the UBS-200L
Baud Rate:
38400
Parity:
None
Word Length:
8
Stop Bits:
1
Instrument Output Parameters
Output Data Length:
9
Result Start:
1
Result End:
8
Data Terminator:
<CR>
Initialisation Cmd:
GT<CR>
Acknowledge Send:
None
Acknowledge Receive:
None
4. Select “Test” at the bottom of the Setup screen.
5. Select “Implant Reader” from the “Interface Type” box.