User's Guide
USER GUIDE: UBS-200L LF DESKTOP READER
April 4, 2019
Unified Information Devices | Chapter 3 – Operating and Configuring the UBS-200L
32
Appendix 1 – Default Settings and Response/Error Codes.
Note:
The “BD” command does NOT affect the baud rate between the
UBS-200L and the Host PC. If it is desired to change the baud rate
between the UBS-200L and the Host PC, please use the Change
Host Baud Rate “UID BD” command.
Note:
Changing the BD value can disconnect communications between
the UBS-200L and the internal LF Module. Only make
adjustments to this parameter if instructed to do so by UI Devices.