Operating instructions

ManualsBrandsUnified Brands ManualsKitchen AppliancesGROEN HYPERSTEAM HY-6E(CE) Operator service

OM-HY-6E

2. Steam Generator and Cooking Chamber

Regular deliming, depending on your steamer usage

and local water quality, must be done to enhance

performance and prolong the life of your

HyPerSteam™ convection steamer. Steamer must

be turned off after every use to prevent lime scale

buildup - do not run steamer continuously.

ALWAYS USE HOT PADS OR MITTS WHEN

HANDLING HOT STEAMER PANELS OR RACKS.

RECOMMENDED TOOLS & CLEANERS

- Groen Delimer/Descaler (Part Number 114800). Do

NOT use any product containing chlorides or

sulfamic acid, including hydrochloric acid .

- Nylon scrub pad, cloth and/or sponge

DELIMING STEPS HY-6E (Use Touch Pad):

1. Press ON/OFF to turn off. Open door(s).

2. Let cavity cool for 5 minutes or longer. While

cool, wipe out cavity. Drain holes at rear of

cavity must be clear of debris. Close door(s).

3. Press and hold CLEAN while turning steamer on

pressing ON/OFF, until only DELIME and

POWER light remain on (all lights will turn on,

then off, except DELIME and POWER.

4. After 5 minutes, beeper will beep rapidly,

signaling you to add Groen Delimer/Descaler.

Door(s) must remain closed for entire delime

cycle.

5. Pour 1 pint (2 cups) of delimer per cavity into

upper and/or lower delimer ports(s). Press

CLEAN. Double -stacked unit cavities may be

delimed together or separately.

6. Delime cycle will start, taking about 30 minutes.

When delime cycle is complete, DELIME light

will appear, DONE light will flash and beeper will

beep.

7. Press ON/OFF to turn steamer off. Let cavity

cool for 5 minutes or longer. Open door(s),

wipe out inside of cavity and wipe door

gasket.

8. To use steamer, press ON/OFF. When READY

light appears, steamer is ready to use.

NOTES:

- If delime light flashes rapidly (5 times per second),

press DELIME to restart delime cycle.

- If power outage occurs during deliming, delime

cycle must be restarted. Press DELIME.

- For best performance, do not interrupt delime cycle.

If delime cycle must be stopped, press ON/OFF to

turn off. Let cavity cool for 5 minutes or longer.

Press ON/OFF to turn on. Set timer for 5 minutes.

After beeper beeps, press ON/OFF to turn off. Let

cavity cool for 5 minutes or longer, carefully open

door(s) and wipe out cavity completely.

Deliming

Port

om-HY-6e