User's Manual

IMPORTANT: Before using the BTS30 Hands-Free
Speakerphone:
• Charge the battery before using for the first time
• Only use rechargeable batteries provided
A. Low Battery Indication
Recharge battery when:
• Red indicator light turns red
• BTS30 emits a beeping sound
B. Charging the Battery
Follow the steps below when charging the BTS30
Hands-Free Speakerphone:
• Insert the charging cable to the USB charging port of
the BTS30
• Plug the cable to a power port
• When the device is in charging mode, the red battery
indicator light is On indicating that charging is in
progress
NOTE:
• Standard charge time is around 3 hours
• Battery indicator light will turn Off once fully charged
IMPORTANT:
Do not leave unit charging unattended if
you must leave key in the ignition to charge, unless your
vehicle is equipped with a port that is powered with key
out of ignition.
NOTE: To charge the unit at home, use a 12V DC to AC
convert or use a USB power outlet with a USB to Mini
USB cable
Installations
IMPORTANT: Before installing the BTS30, make sure:
• Vehicle is parked in a safe area
• Car engine is OFF
• Emergency brake is set
Your BTS30 may be installed in your vehicle’s sun visor.
Sun Visor Mounting
Follow the steps below to install the B T S 3 0 to your car’s
sunshade panel:
• Attach and secure the visor mount on the back side of the
BTS30
• Slide and mount the BTS30 to the vehicle’s sun visor
1
Battery Operations
2
7