Contents • SPECIFICATIONS • DISCLAIMER • WARRANTY / LIABILITIES • PACKAGE CONTENT • INSTALLATIONS • BATTERY OPERATIONS • SPEAKERPHONE OPERATIONS • BUTTON FUNCTIONS AND OPERATION • CARE AND MAINTENANCE • TROUBLE SHOOTING • CUSTOMER SERVICE / CONTACT US • FCC / ICC 2
Specifications Disclaimer - Bluetooth® Spec.: v2.1 • Distracted driving is dangerous. Always use the Bluetooth® Device in a manner that does not reduce your attention and ability to drive carefully and safely. • Adhere to all applicable traffic laws and motor vehicle regulations applicable to the device. • Consult local laws and regulations for any restrictions on installation or use. • Do not install on or near an airbag.
Installations Battery Operations IMPORTANT: Before installing the BTS30, make sure: • Vehicle is parked in a safe area • Car engine is OFF • Emergency brake is set IMPORTANT: Before using the BTS30 Hands-Free Speakerphone: • Charge the battery before using for the first time • Only use rechargeable batteries provided Your BTS30 may be installed in your vehicle’s sun visor. A.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. NOTE: Actual talk time and standby time for the BTS30 will vary with different Bluetooth® enabled mobile phones due to different implementation of power down modes.
• Activate the Bluetooth® settings of your mobile phone NOTE: The following steps are general procedure; to access Bluetooth® Menu for your mobile phone, please refer to your phone user manual.
4. Last Number Re-dial To call last number dialed or called register: • Press the SEND/END button twice 5. Voice Dialing To enter voice dialing mode: • Press and hold SEND/END button for 2 seconds • The BTS30 will emit a beep sound NOTE: Some phones will require you download the phonebook to the unit for the voice dialing function. NOTE: The above-mentioned functions are only applicable to the mobile phones which support the Bluetooth® Hands-Free function.
Button Functions And Operation BUTTON FUNCTION OPERATION Power ON Press and hold for 2 seconds Power OFF Press and hold for 4 seconds ON/OFF SEND/ END 11 Pairing Under OFF mode, press and hold for 4 seconds Mute/Un-Mute Press 1 time Searching for Paired Device Press 1 time Receive Call Once ring tone is heard, press 1 time End Call Press 1 time Reject Press & hold for 2 seconds Last Call Redial Press 2 times Voice Dial Press and hold for 2 seconds Call Transfer Press and hold for
