User's Manual

BEAN
+
12
English
To setup voice
dialing, please refer
to you mobile’s
operation manual.
3.6 Voice Dialing
To Enter Voice dialing mode
1. Hold key for 2 seconds
2. Speak the name after the tone
3. If failed to recognize, you will hear a beep tone twice,
press to exit and repeat above procedures.
3.7 Options during a call
3.7.1 Call Waiting:
**This is a network service , consult your Network provider for details
Accepting new call during a conversation
1. Press and it will automatically switch to Line2
2. To switch between to Lines, press and display will show
.
3. Press
▲ or ▼
to choose
4. Press to confirm
3.7.2 Transfer Call between mobile and Bean during conversation
*
Press for two seconds.
3.7.3 Mic Gain control and Mute
Mic Gain:
To increase Microphone Gain, hold
▲
for 2 seconds.
To decrease Microphone Gain. hold ▼ for 2 seconds
Mute
To mute the mic during a call, simply press . To cancel, press
once again.
2.7.4 DTMF
To use DTMF Function during a call:
1. Hold
for 2 second.
*
Once the call was transferred from Bean to mobile, some mobiles will no longer allow the call transfer back to the bean