Owner`s manual

5
If.. Try..
x you don’t hear a dial tone the
display shows Registration Failed
x making sure the handset is fully
charged, then try again.
Test the Connection
This handset is designed for use with Uniden’s SSE35 and SSE37 bases.
Compatible Bases
REGISTERING TO A BASE
The accessory handset won’t work until you register it to a compatible
Uniden cordless phone!
Registration Methods
Does the handset fit in the base cradle?
Yes Place the handset in the base. The display should say
Registering.
No Does the base have an LCD display?
Yes
On the base, press MENU to open the menus and
then scroll to Register Accy. Press OK.
On the handset, press and hold #DND until the
handset display shows Registering (about 2
seconds).
No
On the base, press and hold FIND HS when the
phone is in standby (about 5 seconds).
On the handset, press and hold #DND until the
handset display shows Registering (about 2
seconds).
#After about 30 seconds, the handset display should say Registration
Complete.
Pick up the handset and press TALK/FLASH. Make sure you get a dial tone.
(Press END/CLEAR to hang up.)