Owner`s manual

6
Place the repeater anywhere inside the range where the
handset had a clear connection with no noise and the icon
showed a strong signal.
4.
Finding the Base’s Coverage Area
Stand near the base and make a call on a cordless
handset that is registered to that base.
1.
Continue the call and carry the handset away from the
base. Make sure you go at least 10 meters.
2.
Make a note where you start to hear noise on your call
(the signal is getting weaker). You can use the signal
strength icon on the handset display to find the best
location: make a note where the icon indicates the signal
is
getting weaker.
3.
Place the repeater inside the
strong signal range (before the
noise increases)
Place the repeater inside the
strong signal range (before the
noise increases)
Strong signal
(no noise)
Strong signal
(no noise)
During a call, carry
the handset from
the base
During a call, carry
the handset from
the base
Weak signal
(some noise)
Weak signal
(some noise)
No signal
(all noise)
No signal
(all noise)
The noise increases as
the signal gets weaker
The noise increases as
the signal gets weaker