XDECT R002 For more exciting new products please visit our website: Australia: www.uniden.com.au New Zealand: www.uniden.co.
Important Safety Instructions! When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • This unit is NOT waterproof. DO NOT expose this unit to rain or moisture. • Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
XDECT R002 Repeater What's in the box? Charger AC adaptor AAD-600S(M) XDECT R002 Repeater • If any items are missing or damaged, contact your place of purchase immediately. Never use damaged products! • Need Help? Get answers at our website: www.uniden.com.au for Australian model www.uniden.co.nz for New Zealand model. How it Works ♦ The repeater is not a telephone; it must be registered to a phone base before using.
Repeater Base coverage area The base signal is strongest; handsets in this area connect to the base. Handsets in this area can connect to either unit. Base Extended coverage area The repeater has a stronger signal; handsets in this area connect to the repeater area ♦ Handsets operate exactly the same no matter which unit they connect to. ♦ Usually, you can't tell when a handset switches between the base and the repeater in the middle of a call.
Set Up the Repeater Connect the Repeater Power Cord Use the included adapter to connect the repeater to a regular indoor (240 V AC) power outlet. Wall-mount holes Registration button Power connector Placing the Repeater Here are a few tips for placing your repeater so that you get the clearest signal and the maximum range: ♦ Place the repeater just inside the base's coverage area, that is, as far from the base as possible where you still have good reception.
Finding the Base’s Coverage Area 1. Stand near the base and make a call on a cordless handset that is registered to that base. 2. Continue the call and carry the handset away from the base. Make sure you go at least 10 meters. No signal (all noise) Weak signal (some noise) Strong signal (no noise) During a call, carry the handset from the base The noise increases as the signal gets weaker Place the repeater inside the strong signal range (before the noise increases) 3.
Testing the Location 1. Place the repeater in its final position and connect the AC adapter. The LINK light will flash for a few seconds, then stay on. If... the LINK light doesn't turn on the LINK light continues flashing Try... - checking the repeater's AC adapter connecting the adapter to a different outlet. - making sure the repeater is not near electronic devices that can cause interference.
Place the Repeater on the Wall You can mount the repeater directly to a wall using the horizontally aligned mounting slots at the back of the repeater unit. Before doing this consider the following: ♦ Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. ♦ Mount the repeater within distance of a working 240V AC power outlet. The Repeater unit is NOT waterproof.
Registering Repeaters to the Base If you are having trouble with a repeater or if you want to replace one, you need to register the repeater to the base. • Connect the repeater close to the base for easy access to the necessary buttons and indicators. Locate the repeater in the desired position after registration is complete. 1. On the base, open the menu and select Register Accy. 2.
One Year Limited Warranty UNIDEN XDECT R002 IMPORTANT: Satisfactory evidence of the original purchase is required for warranty service Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warrantor The warrantor is either; Uniden Australia Pty Limited ABN 58 001 865 498 (“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the case may be.
User-generated Data This warranty does not cover any claimed loss of or damage to usergenerated data (including but without limitation phone numbers, addresses and images) that may be stored on your Product. Statement of Remedy If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion, will either repair the defect or replace the Product without any charge for parts or service.
© 2011 Uniden Australia Pty Ltd/Uniden New Zealand Limited Printed in Vietnam
