Owner`s manual

23
To... From the base From a handset
replay an
earlier
message
Within 2 seconds after a message starts playing,
press
Rev. select 1 (number key).
skip a message Press
Fwd . Select 3 (number key).
delete a
message
While a message is playing,
press
delete . select 4 (number key).
delete all
messages
With the phone in standby,
press
delete ; press delete
again to confirm.
Not available.
play old
messages
After the system plays all new messages,
press
Play/stoP again. select 2 (number key).
stop playback Press
Play/stoP . Select 5 (number key).
Screening Your Calls
You can use the answering system for call screening. While the system
takes a message, you can listen on the base speaker (if you turn on Call
Screen) or from a handset. Only one handset can screen calls at a time.
If another handset tries to screen calls, it beeps and returns to standby.
To... From the base From a handset
hear the caller
leaving a message
Listen to the caller over the
speaker.
Press
message/mute .
answer the call NA Press
Home/FlasH .
mute the call
screen without
answering
Press
Play/stoP .
Press end or return the
handset to the cradle.
If you mute the call screen, the system continues taking
the message: it just stops playing through the speaker.
Using the System While You're Away from Home
You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select Ans. Setup , then
select Security Code . Use the number keypad to enter a two-digit
security code ( 00 to 99 ). Press menu/select when you’re finished.
Elite9135om_20110115.indd 23 21/9/11 4:53:36 PM