Owner`s manual

16
To... Press...
review the current
entry’s details
menu/select after scrolling to the desired entry.
close the phonebook
end .
For individual entry options, find a number and press
menu/select twice to
display the following options:
To... Press...
save this mobile
phonebook entry to
the home phonebook
menu/select twice to open the menu, then select
Store Into PH BK .
edit the current entry
menu/select twice to open the menu, then select Edit .
delete the current
entry
menu/select twice to open the menu, then select
Delete . To confirm, select Yes .
Adding Phonebook Entries (Home only)
With the phone in standby, open the phonebook. Select Home and then
Create New. Enter a name and number and select a personal ring.
Enter the phone number (up to 20 digits) exactly as you would dial it. ♦
If you need the phone to wait before sending the next set of digits, ♦
press
RedIal/Pause to insert a 2-second pause. You can insert multiple
pauses, but each one counts as a digit (you’ll see P in the display).
To edit the name, press ♦
PHoneBook to move the cursor back and insert
a letter. Press InteRcom/cleaR to delete a letter.
To edit the number, press ♦
InteRcom/cleaR to back up the cursor and
delete numbers. Re-enter the correct numbers.
Deleting All the Phonebook Entries
With the phone in standby, open the phonebook. Select the phone
name and then Delete All . To confirm, select Yes .
Chain Dialing
If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
Make your call normally.1.
When you hear the prompt that tells you to enter the number, open 2.
the phonebook and find the entry that contains your code number.
Elite9135om_20110115.indd 16 21/9/11 4:53:33 PM