User`s guide

3
Installing Your Phone
Charge the Battery
1) Unpack all handsets, battery packs, and
battery covers. If any battery cover is
already on the handset, press in on the
notch and slide the cover down and off.
Line up the red and black 2)
wires on the battery pack
with the label inside the
handset.
Push the connector in until 3)
it clicks into place; tug
gently on the wires to
make sure the battery pack
is securely connected.
4) Place the cover over the battery
compartment and slide it up into place.
Connect the base AC adapter to the 5)
DC IN
6V
jack on the rear of the base. Route the
cord through the molded wiring channel as
shown.
If you have accessory 6)
handsets, connect a
charger AC adapter to each
charger's
DC IN 9V
jack and
set the plug into the notch
as shown. (These adapters
might already be
connected.)
Plug the other end of each adapter 7)
into a standard 240V AC power outlet.
Red
Black