User guide

32
Troubleshooting
Problem
Cause
Solution
The projector does
not turn on.
Battery not inserted
correctly. Battery not
charged.
Make sure the battery is
correctly inserted. Make
sure the battery is fully
charged.
The projector col-
ours look incorrect.
Different Colour
Mode may be se-
lected.
Change to preferred
Colour Mode.
The projector
randomly turns off
but the Blue LED
stays on.
The projector may be
out of the recom-
mended operating
range.
Make sure the projector is
well ventilated and within
the operating temperature
range. Turn off for 5 min-
utes and restart.
Not working with
my iPod.
Incompatible iPod,
- OR –
Incorrect video
mode.
Make sure the iPod has
TV-out functionality and is
enabled. Make sure the
ULP1000 video mode is
correct for the cable be-
ing used.
The projector won’t
turn off or on and
the Blue LED stays
on.
System is frozen.
Press and hold the Power
button for 20 seconds.
If this does not work,
remove battery. Then re-
insert and turn on.
The projector
doesn’t work with
my cell phone.
Not all cell phones
have the TV-out
feature.
Refer to your cell phone
manufacturer’s user guide
if TV-out is available and
how to confi gure.
The image looks a
little fuzzy.
Debris on Window,
- OR -
Image is misaligned.
Clean the Window,
-OR-
Adjust Image Alignment.
The green LED
keeps blinking
while charging.
The battery is not
correctly inserted in
the ULP1000.
Make sure battery is
correctly inserted into
the ULP1000.