Manualshelf

User guide

ManualsBrandsUniden ManualsProjectorULP1000
27282930313233343536
31
Press the button to bring up the on screen menu.
Use the or buttons to navigate to SYSTEM and press .
Use the or buttons to navigate to PROPERTIES and press .
Use the or buttons to navigate to BATTERY INFORMATION and
press
.
Follow these instructions to view how much battery life is remaining.
Care & Maintenance
Fingerprints and other debris may impact the image quality.
Keep the window clean for best image quality.
Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
Lightly wipe the cleaning cloth over the window until clean.
Note:
» Do not attempt to use solvents or other harsh chemicals as it may damage the
window.
» Make sure cleaning cloth is free of dust or debris to avoid scratching the window.
Proper care should be taken to safely store and transport the projector. To store and
transport the ULP1000 use the included storage pouch. Use care and do not drop the
ULP1000 or spill liquids on it.
How to Check Remaining Battery Life
How to Clean the Window
How to Store & Transport
The audio jack on the ULP1000 works only when the Audio signal is is combined with
the Video signal. The Audio Jack is for output only.
How to Use the Audio Jack
Use the or buttons to navigate to PROPERTIES and press .
Use the or buttons to navigate to SYSTEM and press .
Use the or buttons to navigate to SYSTEM and press .
Use the or buttons to navigate to BATTERY INFORMATION and
Use the or buttons to navigate to PROPERTIES and press .
Use the or buttons to navigate to BATTERY INFORMATION and
Use the or buttons to navigate to RESET DEFAULTS and press .
Press the or buttons to select YES and press .
Press the or buttons to select YES and press .
Press the or buttons to select YES and press .
Use the or buttons to navigate to RESET DEFAULTS and press .
Use the or buttons to navigate to RESET DEFAULTS and press .