Owner`s manual

UNIDEN UH8060NB

Operation

DCS (Digital Coded Squelch)

DCS is a digital extension of CTCSS. It provides 104 extra, digitally

coded, squelch codes that follow after the 38 CTCSS codes. CTCSS

1-38, followed by DCS 1-104.

Follow the steps for setting a CTCSS code. Press

/ until the

DCS codes appear.

Press [DCS/CTCSS] to set. The DCS icon and code will display.

Beep On/Off

1. Press [MENU/ENTER] six times.

 TheBeepsettingashes.

2. Press

/ to change the

setting between ON or OFF.

3. Press [MENU/ENTER] to store the setting.

4. Press and hold [MENU/ENTER] to save &

exit from the menu mode.

Backlight

1. Press [MENU/ENTER] seven times.

 TheBacklightsettingashes.

2. Press

/ to change the

setting between OFF, LO and HI.

3. Press [MENU/ENTER] to store the setting.

4. Press and hold [MENU/ENTER] to save &

exit from the menu mode.

UHF CB Transceiver