Owner`s manual

UNIDEN UH8060NB

Turning on the Power

Press and hold the [POWER] button.

NOTE

Low-Voltage/High-Voltage Alert

Ifthepowersupplyvoltageexceeds18VDC,analerttone

sounds and HI DCashesfor5seconds.Thepowersource

mustnotexceed25VDCotherwisepermanentdamage

may occur to your radio, which may not be covered by the

manufacturer’s warranty.

Iftheinputvoltagefallsbelow10VDC,LO DCashesfor5

seconds. The power turns off automatically if voltage falls

below8.5VDC.

Switch your UH8060NB OFF and disconnect it from the power

source, before locating the cause of the power supply problem.

Operation

UHF CB Transceiver