Owner`s manual

Operation

UHF CB RadioUNIDEN UH720SX-NB/UH710SX-NB

Group Scan(GS) Mode

To change between OS and GS scan;

1. Press

four times.

GS setting ON or OFF will ash.

2. Press

or to change the selection.

3. Press and hold

to save and exit.

To initiate scanning,

1. When

is pressed during

Group Scan Mode, SCN will blink

and Group Scan Scanning begins.

2. To deactivate GS scanning, press

or .

NOTE

1. If SCAN is deactivated while it is tuned to an active

channel, the UH710SX-NB/UH720SX-NB will stay on that

active channel. If none of the channels re- active, the radio

will reinstate the Scan start channel.

2. If GS Scanning is initiated when there are no channels

programmed in GS memory, an error tone will be heard and

scanning will not start.