User`s manual

12
LED State What it means
Power
Status
On The camera is on.
Off The camera is off.
Link
Status
Flashing The camera is in pairing mode.
Orange The camera is connected to the receiver.
Off The camera is in standby.
Battery
Status
Green The battery is charging.
Red The battery is low; the camera will turn off in 3 minutes.
Off The battery is fully charged.
Using the camera mount
The indoor camera has a built‑in stand so you can place it on any flat surface. If you want to place
your camera on a wall or a ceiling (or even if you just want to secure it to a flat surface), you can
use the included camera mount. (You might want to bring the receiver along when you mount
the camera; it’s much easier to get the camera into the right position when you have the display
handy.) Refer to the mounting instructions with the outdoor camera on page 9. The camera mount
screws into the back of the indoor camera.