User`s manual

21
Resetting Your System
Resetting the camera or receiver will erase any changes and set all values back to the default.
You should only reset your system under the following conditions:
Resetting the camera Resetting the receiver
You are unable to pair the camera to the
receiver.
The image on the screen is frozen.
-
-
The buttons on the receiver are not
responding.
The image on the screen is frozen, and
resetting the camera did not help.
-
-
To reset the camera or receiver, unplug the AC adapter. Wait at least 15 seconds, then reconnect
the AC adapter.
Additional Information
Product Specications
Radio Frequency Transceiver
RF Frequency 2402 Mhz ~ 2483.5 Mhz
Modulation GFSK
Spread spectrum Frequency Hopping
Anti Interference Clean Channel Dynamic Select
Selectable camera channel 4
Data rate 2 Mbps
Channel bandwidth 2 MHz
Transmitting range 200 meters/600 feet in an open area (line of sight)