UDW-20000 Series Video Surveillance System User’s Manual What's in the box? UDW20000 receiver with 7‑inch color display and remote control You might also find: Camera stand UWDC25 wireless weatherproof camera K O Extension cord Software CD AC adapter AV cable Antenna If you purchased You should model number: have: UDW20005 1 of each UDW20055 2 of each UDW20555 3 of each UDW25555 4 of each AC adapter USB cable If any items are missing or damaged, contact our Customer Care Line immediately.
Important Safety Instructions! This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: ► This equipment is NOT waterproof. DO NOT expose it to rain or moisture. ► DO NOT immerse any part of the product in water.
For best results: To avoid damage to your equipment, follow these simple precautions: ► Do not drop, puncture or disassemble any part of the equipment. There are no user-serviceable parts inside. ► Do not expose the equipment to high temperatures, and avoid leaving the equipment in direct sunlight for more than a few minutes. Heat can damage the case or electrical parts. ► Do not place heavy items on top of the equipment or expose the equipment to heavy pressure.
Getting Started Connect the Power Registration Name: Registration Code: 1. Connect one AC adapter to the receiver’s power input (all the AC adapters are exactly the same). 2. Attach an antenna to the rear of each camera and connect an AC adapter to the camera’s power input pigtail. (If necessary, connect the extension cord to the camera’s pigtail and connect the AC adapter to the extension cord.) POWER voyants Statut de mise en/hors fonction button 3.
Check the Video Signal As soon as the receiver powers on, it detects the camera and shows the video on the display. The icons at the top of the screen tell you what’s going on with the camera and receiver. Signal status Channel status 1 The table below shows the different status icons and what they mean. Since the icons appear based on the state of the camera and receiver, you won’t see all of these icons at the same time.
Learning Your System Get to Know the Camera Front view Power status Back view Power connector pigtail Antenna connector Mounting bracket Sun shield Lens Link status Grooves for sun shield Power status Link status State The camera is on. Off The camera is off. Flashing The camera is in pairing mode. Orange The camera is connected to the receiver. Mounting post Post lock The camera is in standby.
Switch the bracket If you want to mount the camera in a hanging position, you’ll need to flip the bracket to the top of the camera: 1. Loosen the bolts on the side of the mounting bracket. 2. Carefully slide the bracket off of the camera and sun shield. 3. Rotate the bracket 180° and slide it back onto the camera. 4. If necessary, adjust the camera angle, then tighten the bolts. 2 Flip the bracket upside down and slide it back onto the camera.
Attach the camera 1. Attach the camera bracket to the mounting screw. Tighten it a few turns, then turn the camera to face the direction you want. 2 1 Tighten the brace against the camera to secure it in place. Attach the camera to the mounting screw and turn it to the desired direction. 3 Loosen the wingnut to unlock the mounting post. 4 Adjust the post to the correct angle, then tighten the wingnut to lock the post into place. 2.
Get to Know the Receiver and Remote Antenna Display Speakers Link status Signal status IR sensor DOWN SELECT MENU/ OK CAMERA ZOOM POWER LEFT RIGHT OK UP What the buttons do Button What it does POWER - Turn the receiver on. Press and hold to turn it off. SELECT CAMERA - Cycle through the active cameras and quad display. - From the pairing menu: link to the selected camera.
Button What it does DOWN - In zoom mode: pan to the bottom of the zoom area. - In the menu: move the cursor down one line. - In quad display: go to channel 2. LEFT - In zoom mode: pan to the left side of the zoom area. - In the menu: cycle through the available options for the selected menu item. - In quad display: go to channel 4. RIGHT - In zoom mode: pan to the right side of the zoom area. - In the menu: cycle through the available options for the selected menu item.
Using the Menu To open the menu, press OK Use UP and DOWN to move the cursor Audio Vol Scan Time CAM1 CAM2 CAM3 CAM4 Pair CAM System Factory The selected item is Use LEFT highlighted and RIGHT to scroll 11 9 10 through the OFF options for ON the item ON ON Brightness 10 ON TV out NTSC 1234 Power Save OFF To open the Setup System Setup Reset OK sub-menu, press To close the menu, press OK Item Use it to Audio Vol Adjust the volume of the audio from the camera.
The receiver can zoom in so you can see the video better. In zoom mode, the receiver increases the pixel size and focuses on the center of the picture. You will also see the ZOOM icon in the upper right corner of the display. Normal view (VGA) Pan and tilt features are only available in zoom mode. 1 1 Tilt up Pan right Pan and tilt in zoom mode Once in zoom mode, you can pan and tilt the camera to see the outside edges of the zoomed in area.
Connecting to Your TV You can connect the receiver to any standard television with RCA composite video inputs. Television with standard RCA composite inputs (maximum 32 inches diagonal recommended) Audio (white) AV out Video (yellow) AC adapter (already connected) To use bandwidth efficiently, the system compresses the video signal using Motion-JPEG; the system then digitizes the signal before transmitting it to provide a secure video link.
Multiple Camera Features Your receiver supports a total of four active cameras at a time. You can mix and match any of the accessory cameras. (See our website for compatible camera options.) Pairing Cameras Pairing is like introducing the camera and the receiver so they can communicate. Any cameras that came with your receiver are already paired for you, so you’ll perform the pairing procedure if you want to add a new camera to your system or if you are having trouble with a camera. 1.
Changing to a Different Camera ► On the receiver, press to cycle through the enabled channels from CAM1 through CAM4. After the last enabled channel, the receiver goes to quad display, then back to the first camera. 1 2 3 1 3 ► 4 2 4 Each time you press , the receiver goes to the next enabled channel, regardless of whether there is a camera present on that channel. If there is no camera signal on a particular channel, the receiver shows a black screen with the message No Signal.
Setting Up a Scan You can have the receiver automatically cycle through the enabled channels. 1. Open the menu, and scroll down to select Scan time. 2. Use Right or Left to select the amount of time you want the receiver to stay on each camera. Choose 5 seconds, 10 seconds, 15 seconds, or 20 seconds. To turn off the scan and stay on the current channel, select Off. To set the receiver into quad display, select Quad (see Using Quad Display on page 17). 3.
Using Quad Display In quad display, the receiver puts all four channels on the screen at the same time. The channels appear in the positions shown to the right: ► If a channel is disabled or there is no signal from the camera, that channel's section of the quad display will be blank. To enter quad display 1. Open the menu. 2. Scroll down to select Scan time. 3. Use Right or Left to select Quad. OR press until the display cycles around to quad display.
Solving Problems If you have any trouble with your system, try these simple steps first. If you still have a question, call our Customer Care Line listed on the front cover. If… Try.. The image on the display is too bright. - Adjusting the brightness on the receiver (in the system setup sub-menu). - Moving the camera’s sun shield forward over the lens. The image on the display is too dim. - Adjusting the brightness on the receiver (in the system setup sub-menu).
Unstable or Weak Signal If the video seems to lag and or the audio sounds weak, the camera and the receiver do not have a strong, clear signal between them. There are several causes for a weak signal: Possible Cause Solution The camera might be too far from the receiver. - Adjust the antennas on the receiver and the camera. Often, changing the angle of the antenna can improve the signal strength. - Try moving the camera closer to the receiver.
Signal Level Icon Data Rate (kbps) Frames per second (approx) QVGA (Zoom) VGA (Normal) Low 250~543 0~5 0~1 Zero 0~250 0 0 If the suggestions above don’t provide enough improvement in the the signal quality, you may want to run the camera at QVGA or zoom mode. When the camera is in zoom mode, it sends fewer pixels to the receiver, so the video performance is not as affected by the weak signal. Noise or Static The most likely cause of noise (flickering image) or static is interference.
Resetting Your System Resetting the camera or receiver will erase any changes and set all values back to the default. You should only reset your system under the following conditions: Resetting the camera Resetting the receiver - You are unable to pair the camera to the receiver. - The image on the screen is frozen. - The buttons on the receiver are not responding. - The image on the screen is frozen, and resetting the camera did not help. To reset the camera or receiver, unplug the AC adapter.
Image Specification Output Image resolution 640 x 480 (VGA)/ 320 x 240 (QVGA) Image processing Motion JPEG Exposure Auto White balance Auto System Specifications Camera Receiver Weight 240 g 500 g Dimension 175 x 64 x 42 mm 220 x 145 x 36 mm Operating temperature -10° C (+14° F) to +50° C (122° F ) Input voltage 100-240 V AC @ 60 or 50 Hz Operating voltage 5 V DC @ 1 Amp Low light solution 24 IR LEDs, 1 Low light sensor Low light sensitivity 1-8 lux Picture sensor OV7725 1/4’ Colo
FCC Compliance Information CAUTION! Any changes or modifications to this equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
One-year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 12 months after the date of original retail sale.
