Specifications

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
The scanner checks up to 10 user-programmed channels for two-tone sequential, single,
or group paging tones. When it detects a tone that matches the configuration for that
channel, the scanner displays the tone information and opens squelch. For more
information about Tone Out Mode:
● BCD396XT or BC346XT: Hand Held Tone-Out Mode
● BCD996XT: BCD996XT Tone-Out Mode
● BCT15X: BCT15X Tone-Out Mode
To enter Tone Out mode, tap MENU , then scroll down and select Tone-
Out for...
To exit Tone Out mode, enter Scan mode.
Band Scope mode
The scanner searches a frequency ranges and displays a visual representation of the
signal level. For more information about Band Scope Mode:
● BCD396XT or BC346XT: Hand Held Band Scope Mode
● BCD996XT: BCD996XT Band Scope Mode
● BCT15X: BCT15X Band Scope Mode
To enter Band Scope Mode:
1. Set one of the 3 search keys to a Band Scope search.
2. Enter Search mode.
3. Press & hold the designated search key.
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (8 of 8)4/7/2009 10:08:47 AM