Specifications

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html
❍ Create at least 1 channel in each group
■ Channel properties
Programming a P25 System
To program a P25 system, you'll need to program the required elements in following order:
Create a system
1. Go to the Program System menu and choose New System .
2. The scanner will prompt you for the System Type. Select P25 .
3. The scanner will prompt you for the sub-type. Select Standard trunk .
4. When the scanner prompts you confirm, tap YES .
5. The scanner creates the system with a default name. Select Edit Name if you want to change it.
6. If you need to change any of the system properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's Program System menu. If necessary, the sub-
menu and option name on each scanner are listed beside the property.
Property Option name
Required
None
Recommended
Name
Edit Name
Number tag
Edit Sys Option#Set Number Tag
Optional
Automatic Gain Control (AGC)
BCD396XT: Edit Sys Option#Set Audio AGC
BC346XT: Not available
Delay time
Edit Sys Option#Set Delay Time
ID format
Edit Sys Option# Set ID Format (DEC/HEX) or (AFS/DEC)
ID scan/search
Edit Sys Option#ID Scan/Search
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (2 of 7)4/7/2009 10:08:29 AM