Specifications

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html
Hold time
Set Hold Time
Location
information
Set Location
Info
Lockout
Set Lockout
Modulation
Set Modulation
Startup key
Set Startup Key
Available operations
Delete a site
Delete Site
Create at least 1 frequency in each site
Each trunked system can contain up to 23 frequencies in each site, and all sites must contain at least 1
frequency.
1. On the Edit Site menu, select the site you just created.
2. Go to the Set Frequencies sub-menu and select New Frequency .
3. Enter at least 1 frequency for this site.
4. When you enter a new frequency, the scanner will prompt you for the logical channel number
or LCN for that frequency. Enter a number from 1 through 30.
5. If you need to change any of the frequency properties, you can do that now. Unless a property
is Required , you can operate the system without changing the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If
necessary, the sub-menu and option name on each scanner are listed beside the property.
Property Option name
Required
Logical channel
number
Input LCN
Recommended
None
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (4 of 7)4/7/2009 10:08:26 AM