Specifications

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html
To a trunked system:
1. Open the Program System menu.
2. Select the system you want to assign the Quick Key to.
3. Select Edit Site, then select the site you want.
4. Select Set Quick Key, then enter the Quick Key you want to use for this site.
To the Close Call Hits system :
1. Open the Close Call menu.
2. Select Hits with Scan, then select Set Quick Key? .
3. Enter the Quick Key you want to use for the Close Call Hits system.
To a service search range :
1. Open the Search for... menu.
2. Select Edit Service, then select the service search range you want to assign the
Quick Key to.
3. Select Search with Scan, then select Set Quick Key.
4. Enter the Quick Key you want to use for this search range.
To a custom search range :
1. Open the Search for... menu.
2. Select Edit Custom, then select the custom search range you want to assign the
Quick Key to.
3. Select Search with Scan, then select Set Quick Key.
4. Enter the Quick Key you want to use for this custom search range.
Assigning a GQK
● All channels in the channel group will be enabled (or disabled) when you enter
the GQK.
● Multiple channel groups in the same system can share the same GQK. However,
all of these channel groups will be enabled (or disabled) when you enter the GQK
from within that system.
● You can assign GQKs to channel groups even if their system does not have an
assigned SQK.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (2 of 4)4/7/2009 10:08:57 AM