Owner`s manual

91
Searching and Storing
[MENU]
  Search for ... F
 Edit Service F
 Select a service range:
Set Delay Time
Choose a delay time to set how long the scanner stays on a transmission after it
ends.
 to select a value from 1 sec, 2 sec, 3 sec, 4 sec, 5 sec, and Off. F
Set Attenuator
Choose to attenuate all frequencies by about 20 dB.
 to select to choose an attenuation for all frequencies in the range. F
On — the frequencies are attenuated.
Off — the frequencies are not attenuated.
Set Record
 to enable real time audio output from REC to an audio recording device.
On — the scanner outputs the signal. Then press
F to select.
Off — the scanner does not output any audio. Then press
F to select.
Assigning a Search Range to a Search Key
You can assign any of the Service or Custom Searches to the six Search keys for
quick access to your favorite searches.
[MENU]
  Search for ... F
 Set Search Key F
 Select the key to assign F
 Select a search range F
Now, to access that search, hold on any channel, then press F and the number
key [1] to [6] corresponding to the search range.
UB356ZH.fm Page 91 Wednesday, December 19, 2007 11:28 AM