Owner`s manual

90
Set Lockout — lets you lock the custom search range for this session or
permanently as with any other L/O action.
Set Hold Time — sets how long (seconds) the custom search range is checked
before the scanner moves to the next programmed entry.
Search With Scan
When you press [SCAN/SEARCH] the UBC800XLT starts a scan of those sites,
channels, etc you have manually programmed or the Uniden preprogrammed data
for your metropolitan area that are unlocked and have their System Quick key
enabled.
In addition to this scan you can search any of the preprogrammed service or
custom search ranges.
While scanning, press
F. Rotate the Scroll Control until you reach the desired
service or custom search range. Press [L/O] to unlock it. You can also assign a
System Quick Key to the search to make it easy to quickly enable/disable the
search range for search and scan. The Search with Scan Hold time determines
how long the scanner stays on a search before moving on. The default is 2
seconds.
F to set the Search with Scan settings.
Editing a Service Search
You can change the way service search works for each service. There are also two
methods to reach the point of editing.
Method One
[MENU]   Search for ... F
 Edit Service F
 Select a service range:
Air, Marine, CB AM Radio, CB FM Radio, PMR, LPD
F
Method Two
F + [SCAN/SEARCH] 
Quick Search? Yes=”E” / No=”.”
Press [.No] then
 to Edit Service F
At this point you can edit each of the settings that comprise each custom search
range.
The following show you how to set the various option settings associated with a
Service. For each, your starting operation is
UB356ZH.fm Page 90 Wednesday, December 19, 2007 11:28 AM