Owner`s manual

88
Notes:
• Search ranges are preset. These ranges can be edited. See “Editing a Custom
Search Range” on Page 88 to change the range.
• You cannot turn off all custom search ranges.
[MENU]
  Search for ... F
 Custom Search ... F
The other approach is:
F + [SCAN/SEARCH] 
Quick Search? Yes=”E” / No=”.”
Press [.No] then
 to Custom Search F
The scanner starts custom search of the custom search range you selected,
stopping on any transmission it finds and displaying the frequency. Turn the Scroll
Control to change the search direction. An arrow appears, showing the current
search direction.
To turn search ranges on or off, press [0] and [1] - [9]. To hold searching, press
[HOLD/RESUME]. To resume searching, press [HOLD/RESUME].
To lock out a frequency found while searching, press [L/O]. There are two different
results based on the number of times you press [L/O].
Press [L/O] 1 time: Temporary L/O appears
Press [L/O] 2 times: Locked Out appears and the scanner resumes custom
search.
If you turn off the active custom search range, the scanner skips to the next
custom search range and continues searching.
Note: If all frequencies in all active custom search ranges are locked out, All
Locked! appears and the scanner does not stop.
Editing a Custom Search Range
You can edit up to 10 custom search ranges. The names of the custom search
ranges appear on the display. The default custom search range names appear as
Custom 1, Custom 2, and so on.
[MENU]
  Search for ... F
 Edit Custom F
 Custom 1, Custom 2 to Custom 10. F
UB356ZH.fm Page 88 Wednesday, December 19, 2007 11:28 AM