Owner`s manual

77
Programming Your Scanner
[MENU]
 Program System F
 Select a trunked system F
 Edit Site F
 Select a site F
 Delete Site F
Confirm Delete?
Yes=”E” / No= ”.”
Important: Deleted sites cannot be restored. You must re-enter them.
[MENU]
 Program System F
 Select a system F
 Edit Group F
 New Group F
The scanner creates a group with a default name of Group n. n increments by
one for each new group you create within a system.
[MENU]
 Program System F
 Select a system F
 Edit Group F
 Select a New Group F
 Edit Name F
Follow these steps to enter/edit the group name.
1. The current name displays with the first character of the name highlighted.
2. Rotate the Scroll Control to select a new first letter. Press [6] to move one
character to the right. Repeat the Scroll Control action to change the
character. To move one character to the left, press [4].
3. Repeat Step 2 until you have entered the system name. Then press
F to
accept the setting.
Notes:
• Each group name can be up to 16 characters. Abbreviate as necessary to fit.
Deleting Sites ME
Programming Channel Groups MECL
Setting Up a Channel Group MECL
Editing a Channel Group Name MECL
UB356ZH.fm Page 77 Wednesday, December 19, 2007 11:28 AM