Owner`s manual

69
Programming Your Scanner
 Edit Sys Option F
 Emergency Alert F
Off — the scanner does not alert you to emergency transmissions.
Alert 1 - 9 — the scanner sounds an alert beep to notify you of the emergency
transmission. The default alert is Off. You can choose any of 9 different beep
types. Once you choose an alert tone, next:
  Set Level  F
Auto — the scanner automatically sets the emergency alert beep to the master
volume level.
Level 1 - 15 — the scanner adjusts the volume you hear to the level you select.
[MENU]
 Program System F
 Select an EDACS Wide/Narrow system F
 Edit Sys Option F
 EDCS ID Format F
EDACS Talk Group ID’s are commonly provided in one of two formats: AFS and
Decimal. This setting determines how you enter EDACS ID’s and how the scanner
displays them.
AFS Format — the scanner uses AFS format for Talk Group ID’s
Decimal Format — the scanner uses decimal format for Talk Group ID’s
Note: The scanner defaults to AFS (agency, fleet, subfleet) format - the format
used in most EDACS systems.
[MENU]
 Program System F
 Select a system F
 Edit Sys Option F
 Set Record F
This setting controls how the scanner handles the record option for channels in the
system.
All Channel — The scanner sends the audio for all channels in the system to
the REC jack, regardless of the channel’s record option setting.
Setting the EDACS ID Format E
Setting the System Record Option MELCS
UB356ZH.fm Page 69 Wednesday, December 19, 2007 11:28 AM