Owner`s manual

66
[MENU]
 Program System F
 Select a system F
 Edit Sys Option F
 ID Scan/Search F
Sets whether the scanner only stops on talk groups you have programmed in (ID
Scan) or whether the scanner stops on any unlocked channel (ID Search).
[MENU]
 Program System F
 Select a system F
 Edit Sys Option F
 Set Delay Time F
This setting controls how many seconds the scanner waits after a transmission
ends before resuming scanning. Enter a value from [1] to [5] or Off,
then press
F.
Notes:
• The default setting is 2 seconds for each system.
• This setting applies to all channels within the system.
[MENU]
 Program System F
 Select a Conventional system F
 Edit Sys Option F
 Set Data Skip F
This setting controls whether the scanner automatically skips channels it identifies
as data. This includes channels with either no audio or a constant-level audio
source. If turned on, the scanner resumes scanning as soon as it detects the data
signal.
[MENU]
 Program System F
 Select a Conventional system F
 Edit Sys Option F
 Set LocationInfo F
Setting ID Scan/ID Search MEL
Setting Channel Delay Time MELCS
Setting Data Skip C
Setting Location Information C
UB356ZH.fm Page 66 Wednesday, December 19, 2007 11:28 AM