Owner`s manual

< Band Plan 3>

• These Frequency Ranges suit to initial step setting. Step setting will change

them.

• These Modulations are initial settings. They can be selected from AM / FM /

NFM / WFM / FMB / AUTO.

• These Steps are initial settings.

Steps can be selected from 5 / 6.25 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 /

AUTO (kHz).

• If “AUTO” is selected for Modulation or Step, the scanner works with the

modulation or step of this table.

• If the Step is set to 15 kHz, inputable frequencies are xxx.x000, xxx.x150,

xxx.x300, xxx.x450, xxx.x600, xxx.x750, and xxx.x900. For example, the next

frequency of 400.0900 MHz is 400.1000 MHz.

• If the Step is set to 8.33kHz, inputable frequencies are xxx.x000, xxx.x083,

xxx.x166, xxx.x250, xxx.x333, xxx.x416, xxx.x500, xxx.x583, xxx.x666,

xxx.x750, xxx.x833, and xxx.x916.

For example, the next frequency of 100.0916 MHz is 100.1000 MHz.

Frequency (MHz)

Modulation Step (kHz) Remark

Lower Edge Upper Edge

25.0000 29.9950 FM 5

30.0000 79.9937 FM 6.25

80.0000 82.9937 FM 6.25

83.0000 87.2937 FM 6.25

87.3000 107.9500 FMB 50

108.0000

136.9875

136.9916

12.5

/ 8.33

AIR BAND

137.0000 137.9950 FM 5

138.0000 157.9937 FM 6.25

158.0000 160.5937 FM 6.25

160.6000 162.5937 FM 6.25

162.6000 173.9937 FM 6.25

174.0000 215.9500 WFM 50

216.0000 224.9950 FM 5

225.0000 399.9750 AM 25

400.0000 405.9875 FM 12.5

406.0000 439.9937 FM 6.25

440.0000 465.9937 FM 6.25

466.0000 469.9937 FM 6.25

470.0000 512.0000 FM 6.25

806.0000 960.0000 FM 12.5

1240.0000 1300.0000 FM 12.5

UB356ZH.fm Page 12 Wednesday, December 19, 2007 11:28 AM