Owner`s manual

110
In general, an alert based on location is comprised of the following data:
•Latitude
• Longitude
• Speed (optional setting)
• Name (optional setting)
• Alert Type and Sound level (optional setting)
• Direction (optional setting)
There are four setting conditions that can be set to result in alerts:
• A speed setting greater than zero with no direction entered. This results in an
alert based only on speed in any direction.
• A speed setting grater than zero with a specific direction entered. This triggers
an alert when the speed is exceeded but only in the specified direction.
• Speed is equal to zero and a direction is entered along with a location. This
setting is used for a dangerous intersection alert.
• Speed is set to zero and no direction is entered but only location. This is a
point of interest alert.
By pressing & holding [GPS], you can select a location type and store current
location data.
The following table shows the attributes available for each category. Note that
some options are different for a specific location type. Refer to the information that
follows to set those specific attributes.
Menu Option POI
Dangerous
Xing
Dangerous
Road
New Location
•• •
Edit Name
•• •
Set Type (edit)
•• •
Set Alert Beep
•
Set Alert Volume
••
Set Location Info
•• •
Set Heading
••
UB356ZH.fm Page 110 Wednesday, December 19, 2007 11:28 AM