Troubleshooting guide

47
2. Scroll up or down to select bands for Close Call to monitor.
Press Prog. The screen displays that selection and “On.”
You cannot turn o all bands. If you turn o all bands, B1 LO is
automatically set to ON.
Setting
Options
This menu controls whether the scanner will send an alert tone
when a Close Call signal is detected. The options are:
•
- Scanner beeps when a CC signal is found.
•
- Scanner does not beep when a CC signal is found
Setting
Options
This menu controls whether the scanner will screen common
pager frequencies. The options are:
•
- Scanner screens out pager frequencies (lter on).
• PS.OFF - Scanner allows pager frequencies (lter o).