User manual

ARC250 User Manual 1.10 - 55
8.2 INI file settings:
The setup.ini file contains some additional options you can set.
You can open and edit setup.ini with notepad. Do NOT change any other
parameters then the parameters shown in this section!
expert=0 : software will ask confirmation before uploading/deleting data
expert=1 : software will not ask conformation
option4=0 : enable software exit message
option4=1 : disable software exit message
option6=0 : Display warning before sorting an Edacs systems
option6=1 : Disable Edacs sort warning
All other parameters in setup.ini should not be changed!
If you want to restore the default setup.ini, delete the setup.ini file and start
the software, this will create a new setup.ini file.