User manual

ARC250 User Manual 1.10 - 39
6.3 Software settings: Tags
Save memory banks tags: stores the tags of memory banks in mem files.
Automatically clear bank tags: selecting FILE NEW clears the bank tags. If this
option is not selected, ARC250 will show the most recent bank tags stored in
your scanner.
Software remembers last used bank tags: If this option is selected the
software will store and remember the latest memory bank tags.
Read/Send memory bank tags: this option defines whether you want to
synchronize the tags while reading/sending data to/from scanner.
Show Easy Tag dropdown menu: If the tag column is active an extra dropdown
list is shown. All programmed tags are added to this list. This makes is easy to
reprogram memory channel tags without re-typing the tag.
To use this option you first select the tag you want to program, then go to the
editor box left of the dropdown list and press enter to store the data in the
grid. For your convenience there is a dropdown list that contains all tags
programmed and a list only containing the tags programmed in the active
bank.
Display tags in fixed width font: if your system has a fixed width font installed,
the software can display bank and scanlist tags in this fixed width font.