User manual

ARC250 User Manual 1.10 - 32
3.6 EDACS WIDE/NARROW:
You can use either AFS or decimal trunk id format. ARC250 will accept both
AFS and decimal trunk id’s in the trunk id editor.
When you program EDACS frequencies, it is critical that you store each
frequency in the correct location. This often is not the frequency order, so you
must be sure you have the right sequence.
It is normal that during Edacs trunk scanning or trunk searching the mode of
the memory channels assigned to Edacs systems changes. Edacs Wide always
uses FM mode, Edacs narrow always use NFM mode.