User manual

ARC250 User Manual 1.10 - 25
2.15: Uploading data into the scanner:
From the main menu select: BC250 _ Send Data from Scanner (or BC785 _
Send Data from Scanner).
Tip: you can also use the toolbar button or press F6.
A new window is shown:
First select whether you want to send data to all banks or a single bank. Next
select what data you want to upload. For your convenience you do not need to
send all data from the scanner.
Example: if you want to change frequencies in bank 5, you only need to send
the frequency data from bank 5.
Data options:
Frequencies: the frequency data that is stored in your memory channels.
Trunk Id’s: the trunk id’s and tags that are stored in the trunk scan lists.
Trunk settings: the trunk parameters that identify a specific trunk system.
Search Data: the data that is stored in the 10 user programmable search
ranges (also referred to as chain search).
All button: the All button will automatically select all the above options.
After you made your selection, press ‘Send Data’. The software will start to
upload data to the scanner.