User manual

ARC250 User Manual 1.10 - 2
Contents:
1 Introduction and quick start reference
1.1 Software Installation
1.2 Enter registration information
1.3 Connecting the scanner to your PC
1.4 Model and RS232 port setup
1.5 USB information
2 Using the memory channel editor
2.1 Reading data from the scanner
2.2 General hints and tips for using the editor
2.3 Programming conventional frequencies
2.4 Programming trunk frequencies
2.5 Sort data
2.6 Easy Fill
2.7 Using the clipboard
2.8 Copy/Move/Swap banks/channels
2.8.1 Copy/Move/Swap memory channels
2.8.2 Copy/Move/Swap memory banks
2.9 Fill Down / Fill Series
2.10 Other editor options
2.11 Importing frequencies from a website using WebCatcher
2.12 Priority Channels
2.13 Easy Program
2.14 Active Banks
2.15 Sending data to the scanner
2.16 Import/Export data
3 Programming trunk systems
3.1 Motorola Type 2 - 800 MHz
3.2 Motorola Type 1
3.3 Motorola Type 2 - 900 MHz
3.4 Motorola Type 2 - UHF
3.5 Motorola Type 2 - VHF
3.6 Edacs Wide/Narrow
3.7 LT
4 Programming trunk system id's and tags
5 Programming search ranges
6 Software and scanner setup
6.1 General software setup
6.2 Bandplan
6.3 Tags
6.4 Trunk
6.5 Virtual Control
6.6 Automatic MEM file backup
6.7 Scanner general parameters
7 Using virtual control
7.1 Keyboard tab
7.2 History (PRO VERSION ONLY)
7.3 Search Extender (PRO VERSION ONLY)
7.4 Log Setup (PRO VERSION ONLY)
7.5 Audio Setup (PRO VERSION ONLY)
7.6 Audio Recording (PRO VERSION ONLY)
7.7 Font (PRO VERSION ONLY)
7.8 Misc (PRO VERSION ONLY)
8 Misc. items
8.1 Custom bandplan
8.2 Software ini files
8.3 Troubleshooting RS232 communication problems
8.3.1 Set/Check communication settings
8.3.2 Check your cable
8.3.3 Other serial devices
8.3.4 Serial/USB drivers
8.3.5 Use ARC250 autodetect
8.3.6 Comm error 8018
8.3.7 Delay
8.4 Software support
8.5 revision history