User manual

ARC250 User Manual 1.10 - 13
Additional information about trunk frequencies:
Trunk frequencies only use Fm or Nfm mode.
For an Edacs system it is very important that frequencies are programmed in
the right order. If you try to sort an Edacs system a warning is shown.
To setup your scanner for receiving trunk systems:
- Use internet/frequency lists to obtain the correct information about trunk
system settings, trunk frequencies and trunk id’s.
- First setup the trunk system type (Select TRUNK _ SYSTEM SETTINGS)
- Second program the frequencies in the memory editor grid and make
sure the trunk parameter for these channels are set to ON
- Now you can use trunk search mode to discover trunk id’s (refer to
scanner manual) or you can program known id’s in your scanner by
selecting TRUNK _ TRUNK ID’s. For your convenience you can program a
tag for every trunk id’s. The trunk id’s are divided in 10 groups; you can
scan these groups just like normal banks.
- ARC250PRO will log new trunk id’s when you use the trunk search mode
option.
2.5 Sort channels
Memory channels can be sorted. You can either sort ascending or descending.
You can only sort within a single bank. In general scanners will scan faster
when channels in a bank are sorted.
Sorting entire bank: make sure that only one channel line in the grid has the
focus, now you can use the sort ascending/descending options.
Sort a range of channels: highlight the range of channels you want to sort, and
then select the sort option. Only the selected range of channels will be sorted.
2.6 EasyFill
EasyFill is a simple but powerful option that lets you program data in a range
of channels with only a few mouse clicks.
Additionally you can use EasyFill for quickly program a range of frequencies in
a memory bank so you can use a memory as a search bank.
Select EasyFill from the Options menu or use the EasyFill toolbar button to
display the EasyFill window: