User manual

ARC250 User Manual 1.10 - 11
Search Data: the data that is stored in the 10 user programmable search
ranges (also referred to as chain search).
All button: the All button will automatically select all the above options.
After you made your selection, press ‘Read Data’. The software will start to
read data from the scanner. Once reading data is complete the window is
closed and data is transferred to the memory editor grid.
DELAY: This parameters defines the delay the software uses during serial
communication. You can adjust this delay to improve communication speed but
using delays other then the default value may give communication errors. In
case of communication problems always use the default delay of 100mS.
See also chapter 8 for more information about communication speed and
solving communication problems.
2.2: Hints and Tips
Once data is transferred to the memory channel grid you can use many options
to edit your data. ARC250 is the most versatile editor available on the market.
Using the menu or toolbar you can easily move/copy/sort data. All options also
have a toolbar button available. Moving the mouse pointer over a toolbar
button will show a small popup help text.
General information about using the memory channel editor grid:
You can edit data directly in the grid or you can use the editor bar. The editor
bar will automatically change if you click on a column. In the grid there is no
cursor shows.
In the frequency and tag columns you can directly type data, to edit existing
data use the editor bar above the grid.
Most columns support double click for easy data toggle. The space bar has the
same effect as using the mouse double click.
Keyboard shortcuts:
In some columns you can also use keyboard shortcuts:
Mode: A=AM, F=FM, N=NFM, W=WFM
On/Off columns: 0 = OFF, 1=ON, F=OFF, N=ON.