Specifications

_______________________________________________________________________________
MMsg ON|OFF Default: OFF
Mode: Packet/AMTOR MailDrop Host: MU
_________________________________ Parameters: _________________________________
ON - The stored MTEXT message is sent as the first response after an AMTOR
link or Packet connect to the MailDrop is established.
OFF - The MTEXT message is not sent at all.
_______________________________________________________________________________
MMSG enables or disables automatic transmission of the MTEXT message when your
AMTOR or Packet MailDrop links with another station.
_______________________________________________________________________________
Monitor "n" Default: 4 (UA DM C D I UI)
Mode: Packet Host: MN
_________________________________ Parameters: _________________________________
"n" - 0 to 6 signifies various levels on monitor indications
_______________________________________________________________________________
The Monitor command determines what kind of packets on a channel are displayed
when the PK-232 is NOT connected to any other packet stations.
The meanings of the parameter values are:
0 All packet monitoring functions are disabled.
1 Only unnumbered (UI) frames resulting from an unconnected transmission are
displayed. Use this for an "unproto," round-table type QSO. This
setting also displays beacons.
2 Numbered (I) frames are also displayed. I-frames are numbered in order of
generation and result from a connected transmission. Use this to monitor
connected conversations in progress.
3 Connect request (SABM or "C") frames and disconnect (DISC or "D") frames
are also displayed with the headers.
4 Unnumbered acknowledgment (UA) of connect- and disconnect-state frames are
also displayed with either the characters "UA" or "DM" and a header.
5 Receive Ready (RR), Receive Not Ready (RNR), Reject (RJ), Frame Reject
(FRMR) and (I)-Frames are also displayed.
6 Poll/Final bit, PID and sequence numbers are also displayed.
_______________________________________________________________________________
MOrse Immediate Command
Mode: Command Host: MO
_______________________________________________________________________________
MORSE is an immediate command that switches your PK-232 into the Morse mode.
Unless you change MSPEED, your PK-232 uses the default Morse transmit speed
value of 20 WPM.
8/91 A-53
From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library