Specifications

_______________________________________________________________________________
HPoll ON|OFF Default: ON
Mode: Host Host: HP
_________________________________ Parameters: _________________________________
ON - The HOST Mode program must poll the PK-232 for all data (default).
OFF - The HOST Mode program must accept data from the PK-232 at anytime.
_______________________________________________________________________________
When HPOLL is ON (default) the HOST Mode program must poll the PK-232 (using the
<CTRL-A> O G G <CTRL-W>) for all data that might be available to be displayed to
the screen. When HPOLL is OFF, the HOST Mode program must be able to accept any
data from the PK-232 whenever it becomes available.
_______________________________________________________________________________
Id Immediate Command
Mode: AMTOR/ASCII/Baudot/Packet Host: ID
_______________________________________________________________________________
In AMTOR, the ID command acts like the RCVE command, only adding a Morse ID
before going back to receive. In ASCII and Baudot, the ID command causes a CW
ID to be sent much like an immediate version of the CWID character (CTRL-F).
Because the ID command is immediate, the message "Transmit Data Remaining" will
be displayed if any unsent data remains in the transmit buffer.
In Packet, ID is an immediate command that sends a special identification
packet. The ID command allows you to send a final identification packet when
you're taking your station off the air. HID must also be set ON. The
identification consists of a UI-frame, with its data field containing your
MYALIAS (if any) and your MYCALL and the word "digipeater". The ID packet is
sent only if your PK-232 has digipeated any transmissions since the last
automatic identification.
_______________________________________________________________________________
ILfpack ON|OFF Default: ON
Mode: Packet Host: IL
_________________________________ Parameters: _________________________________
ON - The PK-232 ignores all line-feed characters received from the terminal.
OFF - The PK-232 transmits all line-feeds received from the terminal.
_______________________________________________________________________________
The ILFPACK command permits you to control the way the PK-232 handles line-feed
characters received from your computer or terminal while in the Packet mode.
8/91 A-44a
From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library