Specifications

FSPEED, 8" width (narrow) FSPEED 13" width (wide)
Dot Density 0 1 2 3 4 0 1 2 3 4
60 dpi
72 dpi s
80 dpi x
90 dpi x
96 dpi s x
100 dpi s x
120 dpi s x x
136 dpi x x x
144 dpi x s x x
160 dpi s x x x x x x
200 dpi x x x x x x x
240 dpi s x x x x x x x
_______________________________________________________________________________
HBaud "n" Default: 1200 bauds
Mode: Packet Host: HB
_________________________________ Parameters: _________________________________
"n" - values specifying the data rate in bauds from the PK-232 to the radio.
_______________________________________________________________________________
HBAUD sets the radio ("on-air") baud rate only in the Packet operating mode.
HBAUD has no relationship to your computer terminal program's baud rate.
Available HDLC packet data rates "n" include 45, 50, 57, 75, 100, 110, 150, 200,
300, 400, 600, 1200, 2400, 4800 and 9600 bauds. Internal modems are provided
for 45 - 1200 bauds. At higher data rates, an external modem must be used.
_______________________________________________________________________________
HEAderln ON|OFF Default: ON
Mode: Packet Host: HD
_________________________________ Parameters: _________________________________
ON - The header in a monitored packet is printed on a separate line from
the text.
OFF - The header and text of monitored packets are printed on the same line.
_______________________________________________________________________________
When HEADERLN is ON (default), the address is shown, followed by a <CR><LF> that
puts the packet text on a separate line as shown below:
WX1AAA>WX2BBB:
Go ahead and transfer the file.
HEADERLN affects the display of monitored packets. When HEADERLN is OFF, the
address information is shown on the same line as the packet text as shown below:
WX1AAA>WX2BBB: Go ahead and transfer the file.
4/91 A-42
From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library