Specifications

_______________________________________________________________________________
Echo ON|OFF Default: ON
Mode: All Host: EC
_________________________________ Parameters: _________________________________
ON - Characters received from the terminal ARE echoed by the PK-232.
OFF - Characters are NOT echoed.
_______________________________________________________________________________
The ECHO command controls local echoing by the PK-232 when in Command or
Converse Mode. Local echoing is disabled in Transparent Mode.
o Set ECHO ON (default) if you don't see your typing appear on your display.
o Set ECHO OFF if you see each character you type doubled.
ECHO is set correctly when you see the characters you type displayed correctly.
_______________________________________________________________________________
ERrchar "n" Default: $5F (_)
Mode: AMTOR, Morse, NAVTEX and TDM Host: ER
_________________________________ Parameters: _________________________________
"n" - A hexadecimal value from $00-$7F used to denote the error character
used by the PK-232 for Morse, ARQ, FEC, NAVTEX and TDM.
_______________________________________________________________________________
n is a hex value $00-7F, default $5F (underscore). This is the character that
the PK-232 displays when it receives a mutilated character in Morse, ARQ,
FEC, NAVTEX or TDM. The user may wish to set this character to $2A (asterisk),
$07 (bell), $20 (space) or $00 (null). ERRCHAR ON or ER Y restores the default.
_______________________________________________________________________________
EScape ON|OFF Default: OFF
Mode: All Host: ES
_________________________________ Parameters: _________________________________
ON - The <ESCAPE> character ($1B) is output as "$" ($24).
OFF - The <ESCAPE> character is output as <ESCAPE> ($1B) (default).
_______________________________________________________________________________
The ESCAPE command selects the character to be output when an <ESCAPE> character
is to be sent to the terminal. The ESCAPE character selection is provided
because some computers and terminals interpret the <ESCAPE> character as a
special command. Set ESCAPE ON if you have an <ESCAPE> sensitive terminal to
avoid unexpected results from accidentally receiving this character.
_______________________________________________________________________________
FAx Immediate Command
Mode: Command Host: FA
_______________________________________________________________________________
FAX is an immediate command that switches your PK-232 into the facsimile mode.
The FAX mode is available only if the maildrop (or FREE command) shows at least
3742 bytes free. You must kill MailDrop messages until the number reaches this
level if you wish to operate FAX.
4/91 A-38
From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library