Specifications

_______________________________________________________________________________
CWid "n" Default: $06 <CTRL-F>
Mode: Baudot/ASCII RTTY/AMTOR/FAX Host: CW
_________________________________ Parameters: _________________________________
The CWID command lets you change the "send CWID" control character typed at the
end of your Baudot and ASCII RTTY dialogue.
When the PK-232 reads this character embedded in the text or keyboard input, it
switches modes and sends your call sign in Morse code, at the keying speed set
by MSPEED. As soon as your call sign has been sent in Morse, the PK-232 turns
off your transmitter and returns to receive.
_______________________________________________________________________________
DAYStamp ON|OFF Default: OFF
Mode: All Host: DS
_________________________________ Parameters: _________________________________
ON - The DATE is included in CONSTAMP and MSTAMP.
OFF - Only the TIME is included in CONSTAMP and MSTAMP.
_______________________________________________________________________________
DAYSTAMP activates the date in CONSTAMP and MSTAMP. Set DAYSTAMP ON when you
want a dated record of packet channel activity, or when you're unavailable for
local packet operation.
_______________________________________________________________________________
DAytime date & time Default: none
Mode: All Host: DA
_________________________________ Parameters: _________________________________
date & time - Current DATE and TIME to set.
_______________________________________________________________________________
DAYTIME sets the PK-232's internal clock current date and time. The date & time
is used in many modes and should be set when the PK-232 is powered up.
The clock is not set when the PK-232 is turned on. The DAYTIME command displays
the "?clock not set" error message until it is set as follows:
yymmddhhmm[ss] (spaces and punctuation are allowed)
Example: cmd:daytime 9003090659
where:
yy is the last two digits of the year
mm is the two-digit month code (01-12)
dd is date (01-31)
hh is the hour (00-23)
mm is the minutes after the hour (00-59)
[ss] is the optional seconds
o Optionally the Dallas Semiconductor DS-1216C SmartWatch may be added to the
PK-232. To install this IC carefully remove the 32K RAM IC and install the
SmartWatch in the RAM socket. Then re-install the RAM IC in the socket
provided by the SmartWatch.
8/91 A-34
From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library