Specifications

_______________________________________________________________________________
CONPerm ON|OFF Default: OFF
Mode: Packet Host: CY
_________________________________ Parameters: _________________________________
ON - The connection on the current channel is maintained.
OFF - The current channel can be disconnected from the other stations.
_______________________________________________________________________________
When ON, CONPERM forces the PK-232 to maintain the current connection, even when
frames to the other station exceed RETRY attempts for an acknowledgment.
_______________________________________________________________________________
CONStamp ON|OFF Default: OFF
Mode: Packet Host: CG
_________________________________ Parameters: _________________________________
ON - Connect status messages ARE time stamped.
OFF - Connect status messages are NOT time stamped.
_______________________________________________________________________________
CONSTAMP activates time stamping of *** CONNECTED status messages.
If CONSTAMP is ON and DAYTIME (the PK-232's internal clock) is set, the time is
sent with CONNECT and DISCONNECT messages. For example, if the clock is set and
CONSTAMP is ON, a connect and disconnect sequence appears as follows:
cmd:10:55:23 *** CONNECTED to W2JUP
cmd:10:55:59 *** DISCONNECTED: W2JUP
_______________________________________________________________________________
CONVerse ( K for short ) Immediate Command
Mode: All Host: Not Supported
_______________________________________________________________________________
CONVERSE is an immediate command that causes the PK-232 to switch from the
Command Mode into the Converse Mode. The letter "K" may also be used.
Once the PK-232 is in the Converse Mode, all characters typed from the keyboard
are processed and transmitted by your radio. To return the PK-232 to the
Command Mode, type the Command Mode entry character (default is <CTRL-C>).
_______________________________________________________________________________
CPactime ON|OFF Default: OFF
Mode: Packet Host: CI
_________________________________ Parameters: _________________________________
ON - Packet transmit timer IS used in Converse Mode.
OFF - Packet transmit timer is NOT used in Converse Mode.
_______________________________________________________________________________
CPACTIME activates automatic, periodic packet transmission in the Converse Mode.
When CPACTIME is ON, characters are packetized and transmitted periodically as
if in Transparent Mode. Local keyboard editing and display features of the
Converse Mode are available. See the PACTIME command for a discussion of how
periodic packetizing works.
4/91 A-30
From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library