Specifications

DELete ONOFF
Mode: packet
OFF
The
(BACKSPACE)
($08)
key is used fbr
editing
your
typing.
ON The
(DELETE) ($7F)
key is used for
editing
your
typing.
Use the
DELETE
command to select the key to
use
for
"backing
up" and deleting text.
Refer
to
BKONDEL
to see how the PK-96 indicates
deletion.
Default:OFF
Host: DL
DFrom ALL, NONE,YES/NO
call1,call2... Default: All
Mode:
packet
Host: DF
call ALL, NONE, YES list, NO list.
(list
=
up to eight call signs,
separated by commas and
no
spaces.)
DFROM
determines how
your
PK-96 responds
to stations trying to
use
your
station as a digipeater.
DFROM is set
to
ALL when
you
first start
your
PK-96. Type DFROM to display the
AL| NONE, YES
list/NO Lst status
of station's call signs whose
packets
will or won't be digipeated.
To
allow one or more specific stations to digipeat
through
your
station,
type DFROM YES, followed by a
list
of call signs. To
prevent
one or more specific
stations
fiom
digipeating
through
your
station, type
DFROM NO
(tbllowed
by a list of call signs). To
prevent
all stations from digipeating through
your
sta-
tion, type
DFROM
NONE
Clear
DFROM with
"/q
&, or OFF as argumcnts.
DlGipeat
OhAOFF
Delault:ON
ON
-
The PK-96 will
digipeat
packets
I'rom all other stations if DFROM
is
set to ALL.
OFF
-
The PK-96 will not
digipeat
packets
f'rom other stations if
DFROM is
set
to ALL or NONE.
DIGIPEAT is included only to maintain upward
compatibility
with
the
TAPR TNCs and some
BBS
soft-
ware that depend
on this command being there. The command DFROM
is much more versatile, and
should be used instead of DIGIPEAT.
Make sure that DFROM is set
to
ALL if
your
soltware
needs
DIGIPEAT.
Disconne
Immediate
Command
Mode:
packet
Host: DI
DISCONNE is
an
immediate
command that initiates a disconnect command to the station
you're
con-
nected to. If
your
disconnect command is successful,
your
monitor will display:
rrtrrr
DrScoNNEcrED:
(cal
I
)
Other
commands
can be entered while a disconnect is in
progress.
New connections aren't
allowed untii
the disconnect is completed.
If
another disconnect command is
entered
while
your
PK-96 is trying to disconnect,
your
PK-96 will
in-
stantly switch to the disconnected
state.