Specifications

CASedisp n
Mode: packet
0 to 2 specifies how
your
PK-96
sends characters to
your
terminal.
CASEDISP allows
you
to set the case of the characters
your
PK-96 sends to
your
terminal;
it
offers
three
possible
modes:
CASEDISP 0'As is"
-characters'case
isn't changed.
CASEDISP
7"lower" -all
characters are displayed in lowercase only.
CASEDISP 2"UPPER"
-all
characters are displayed in uppercase only.
CASEDISP
has no
effect on transmitted data fiorrr
your
PK-96.
CBell OA/OFF
Mode; packet
OFF
"Bells"
aren't sent with the CONNECTED or DISCONNECTED
message.
ON Three BELL characters
(CTRL-G)
are sent to
your
computer with the
"**,'CONNECTED to" or
"DISCONNECTED liorn
(call)"
message.
Set CBELL ON if
you
want to be notified when someone connects to, or disconnects
from,
your
station.
CFrom
ALI- NONE,
YES/NO calll,call2...
Mode:
packet
call
ALL, NONE, YES list,
NO
list.
(list
=
up to 8 call signs, separated by
commas.)
CFROM determines how
your
PK-96 responds to connect requests from other stations.
CFROM
is
set to
ALL when
you
first start
your
PK-96. This means
your
PK-96 will respond to all the connect
requests ad-
dressed to it.
To reject all connect requests,
type CFROM NONE.Your PK-96 sends the calling station a
DM
packet,
or
"bLrsy
signal."
(This
is like leaving
your
telephone off the
hook.)
To
accept calls fiom one or more specific stations,
type CFROM
YES
(lbllowed
by a list of call
signs).
Connect
requests will
be accepted f}om stations whose call signs are
listed
after
CFROM YES.
For
ex-
ample: cmd: cf rom YES WFTA,KGOZL,KBOIUX,WOOP
To reject calls from
one or more specilic stations, type CFROM NO
(followed
by a list of call
signs). Con-
nect requests will be ignored from
stations whose call signs are listed after CFROM
NO. For example:
cmd: cf rom NO WFTA,KG6ZL,KBOIUX,WOOP
You can include
optional SSIDs specified
as
"-rz"
after
the
call
sign. With CFROM NO KB6|UX, connect
attempts from all
SSIDs of
KB6IUX
(KB6IUX-0
through KB6IUX-15) will be ignored.
If
CFROM
is set
to YES KB6IUX-l, then
only
KB6IUX-
I will be allowed to connect to
you.
Clear CFROM
with
/o,
&, or
OFF
as arsuments"
CHCall ONOFF
Mode:
packet
OFF Call sign of originating station isn't displayed
(default).
ON Call sign of the originating
station
ls
displayed in a multiple connection
packet
operation.
With
CHCALL ON, the call sign of the originating station appears after the channel
identifier even
if
you're
connected through more than one
packet
station. With CHCALL OFF, only the channel
number
is
displayed in a single or multiple-connection
operation.
Default: 0
(as
is)
Host: CX
Delault:OFF
Host:
CU
Default: all
Host: CF
Default:OFF
Ftrost:
CB